Lost Communication With Trail Camera Module
The U0288 code means the vehicle's onboard diagnostic system has detected: Lost Communication With Trail Camera Module. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $200 - $800 (parts and labor)

Network codes mean modules are not communicating. You need a scanner that reads all systems to find the problem.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Off-road trail camera not displaying
- Underbody camera view unavailable
- Trail turn assist camera blank
- Camera feed showing static
Probable Causes (Ranked by Likelihood)
- Failed trail camera unit Very High
- Camera damaged by debris High
- CAN bus wiring fault to camera Moderate
- Camera lens contamination Low
Step-by-Step Diagnostic Procedure
-
Clean camera lens and housing
-
Inspect camera for physical damage
-
Scan camera module for codes
-
Check CAN bus wiring to camera
Frequently Asked Questions
Can I drive with U0288?
Yes. Use a spotter instead of the camera for difficult off-road terrain.
What causes U0288?
Usually debris damage or lens contamination from off-road driving.
What is a trail camera?
Cameras mounted under the vehicle to show the ground and obstacles during off-road driving.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.