U0259 moderate

Lost Communication With Active Roll Control Module

The U0259 code means the vehicle's onboard diagnostic system has detected: Lost Communication With Active Roll Control Module. This is a moderate severity code.

My Garage →
Keep driving?
Short distances only
DIY difficulty
hard
Estimated cost
$600 - $3,000 (parts and labor)
Diagnose CAN Bus Issues
LAUNCH CRP123X Full System Scanner

Network codes mean modules are not communicating. You need a scanner that reads all systems to find the problem.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

  • Vehicle leaning excessively in turns
  • Active roll stabilization warning light
  • Stiffer than normal ride quality
  • Roll control system disabled message

Probable Causes (Ranked by Likelihood)

  • Failed active roll bar actuator Very High
  • Hydraulic leak in roll control system High
  • CAN bus communication fault Moderate
  • Roll control pump failure Low

Step-by-Step Diagnostic Procedure

  1. Check active roll bar hydraulic fluid level

  2. Scan roll control module for codes

  3. Test actuator motors

  4. Inspect hydraulic lines for leaks

Frequently Asked Questions

Can I drive with U0259?

Short distances only. The vehicle may lean excessively in turns, affecting handling.

What causes U0259?

Usually a failed actuator or hydraulic leak in the roll control system.

How much does U0259 cost to fix?

Between $600 and $3,000 depending on the component.

Sources

This page is built from documented references. Verify against your own service info before repair work.

Explore More

Was this helpful?

Share carcodefinder.com with a friend who needs to decode their check engine light.