P2902 critical

Transmission Gear Ratio Error - Second Gear

The P2902 code means the vehicle's onboard diagnostic system has detected: Transmission Gear Ratio Error - Second Gear. This is a critical severity code.

My Garage →

Keep driving?: No -- stop driving
DIY difficulty: hard
Estimated cost: $500 - $3,500 (parts and labor)

Check Your Fluid First

ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Read Transmission Codes

LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

Harsh 1-2 shift
Second gear slipping
Check Engine Light on
RPM flare between first and second gear

Probable Causes (Ranked by Likelihood)

Second gear clutch pack failure Very High
Valve body 1-2 shift valve stuck High
Transmission fluid contamination Moderate
TCM shift timing error Low

Step-by-Step Diagnostic Procedure

Monitor 1-2 shift quality with scan tool
Test second gear holding pressure
Inspect valve body shift valve operation
Check for clutch material in fluid

Frequently Asked Questions

What causes a gear ratio error?

A gear ratio error occurs when the TCM detects that the actual gear ratio (calculated from input and output speed sensors) does not match the expected ratio for the commanded gear. This can indicate clutch slippage, speed sensor issues, or internal mechanical failure.

Is this a transmission rebuild situation?

Not necessarily. While internal clutch failure requires major repair, this code can also be caused by speed sensor inaccuracy, low fluid, or valve body issues that are less costly to repair. Proper diagnosis is essential before assuming a rebuild is needed.

Can I continue driving with this code?

Driving with a gear ratio error is risky as the transmission may slip or shift unexpectedly. Have it diagnosed promptly to avoid further damage or a safety hazard.