P2763 serious

Torque Converter Clutch Temperature Too High

The P2763 code means the vehicle's onboard diagnostic system has detected: Torque Converter Clutch Temperature Too High. This is a serious severity code.

My Garage →

Keep driving?: No -- stop driving
DIY difficulty: Advanced
Estimated cost: $200 - $2,500 (fluid change and solenoid to torque converter replacement)

Check Your Fluid First

ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Read Transmission Codes

LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

Check Engine Light illuminated
Shudder or vibration at highway speeds
Poor fuel economy due to torque converter inefficiency
Transmission overheating warning
Harsh engagement or disengagement of torque converter lockup

Probable Causes (Ranked by Likelihood)

Worn torque converter clutch friction material High
TCC solenoid failure or contamination High
Degraded or contaminated transmission fluid Medium
Valve body TCC circuit wear or debris Medium
TCM/PCM calibration issue Low

Step-by-Step Diagnostic Procedure

Scan for codes and confirm P2763 with freeze frame data
Check transmission fluid level, condition, and mileage since last change
Monitor TCC slip speed, apply pressure, and temperature PIDs during road test
Test TCC solenoid resistance and operation with scan tool bidirectional control
Check for updated TCM/PCM calibration (TSBs) for your vehicle

Frequently Asked Questions

What does P2763 mean?

P2763 relates to the torque converter clutch (TCC) system: torque converter clutch temperature too high. The TCC locks the torque converter at highway speeds for fuel efficiency, and this code indicates a problem with that system.

Can I drive with P2763?

Do not drive - the torque converter may be overheating or the TCC may be stuck, which can cause stalling or transmission damage.

How much does it cost to fix P2763?

Costs range from $200 for a fluid change (if contamination is the cause) to $2,500 for torque converter replacement. TCC solenoid replacement is typically $300-$800.