P0941 moderate

Hydraulic Fan Pump Pressure Circuit

The P0941 code means the vehicle's onboard diagnostic system has detected: Hydraulic Fan Pump Pressure Circuit. This is a moderate severity code.

My Garage →

Keep driving?: Short distances only
DIY difficulty: hard
Estimated cost: $150 - $1,200 (parts and labor)

Check Your Fluid First

ANCEL AD310 OBD-II Scanner

Read and clear transmission codes. Many trans codes are caused by low or burnt fluid -- check level and color before assuming the worst.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Read Transmission Codes

LAUNCH CRP123X (Reads All Systems)

Basic scanners only read engine codes. This reads transmission, ABS, and airbag too.

Check Price on Amazon

Affiliate link -- we earn a commission at no extra cost to you.

Common Symptoms

Check Engine Light on
Hydraulic fan pump pressure abnormal
Transmission may enter limp mode
Abnormal transmission behavior

Probable Causes (Ranked by Likelihood)

Faulty hydraulic fan pump pressure circuit Very High
Contaminated or low transmission fluid High
Wiring or connector fault in the circuit Moderate
TCM internal failure Low

Step-by-Step Diagnostic Procedure

Use a scan tool to read Hydraulic Fan Pump Pressure related data
Check transmission fluid level, condition, and color
Inspect the transmission wiring harness and connector for damage or corrosion
Compare sensor readings to manufacturer specifications

Frequently Asked Questions

What does P0941 indicate?

P0941 indicates a problem with the hydraulic fan pump pressure circuit. This is a transmission control system code that requires professional diagnosis.

Do I need a transmission rebuild?

Not necessarily. Many transmission codes are caused by solenoid failures, sensor issues, or fluid problems that can be repaired without a full rebuild.

How important is transmission fluid condition?

Very important. Contaminated or degraded fluid is a leading cause of transmission problems. It causes solenoid sticking, valve body issues, and accelerated clutch wear. Regular fluid changes can prevent many of these codes.