HUD Calibration Error
The B0944 code means the vehicle's onboard diagnostic system has detected: HUD Calibration Error. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- hard
- Estimated cost
- $200 - $1200 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Touchscreen does not respond to touch
- Display has dead spots
- Screen flickers or has lines
- Display brightness incorrect
Probable Causes (Ranked by Likelihood)
- Faulty display panel or digitizer Very High
- Loose display ribbon cable High
- Display control module failure Moderate
- Software glitch affecting display Low
Step-by-Step Diagnostic Procedure
-
Perform display reset procedure
-
Check display cable connections
-
Test display with known-good module
-
Update display firmware
Frequently Asked Questions
Can a touchscreen be repaired or must it be replaced?
Some touchscreen issues can be resolved with recalibration or firmware updates, but physical damage requires replacement.
Why does my touchscreen have dead zones?
Dead zones are usually caused by a failing digitizer layer in the touchscreen that no longer registers touch in certain areas.
Are aftermarket screens available?
Some aftermarket options exist, but factory screens are recommended for proper integration with vehicle systems.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.