Convertible Top Switch Circuit
The B0757 code means the vehicle's onboard diagnostic system has detected: Convertible Top Switch Circuit. This is a moderate severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- hard
- Estimated cost
- $200 - $1500 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Convertible top does not operate
- Top stops mid-cycle
- Hydraulic pump runs but top does not move
- Convertible top warning light on
Probable Causes (Ranked by Likelihood)
- Faulty hydraulic pump motor Very High
- Low hydraulic fluid level High
- Failed top position microswitch Moderate
- Convertible top module failure Low
Step-by-Step Diagnostic Procedure
-
Check convertible top hydraulic fluid level
-
Test hydraulic pump motor operation
-
Inspect microswitches in top sequence
-
Scan convertible top module for faults
Frequently Asked Questions
Why does my convertible top stop halfway?
A microswitch in the sequence has failed, the hydraulic fluid is low, or the top has encountered an obstruction.
Can I manually close the convertible top?
Most convertible tops have a manual override procedure described in the owner manual for emergency closure.
How much does convertible top repair cost?
Costs vary widely from $200 for a switch to $1500+ for hydraulic pump or motor replacement.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.