Washer Fluid Reservoir Heater Circuit
The B0458 code means the vehicle's onboard diagnostic system has detected: Washer Fluid Reservoir Heater Circuit. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- easy
- Estimated cost
- $30 - $200 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Washer fluid does not spray
- Washer pump motor does not run
- Low washer fluid warning stays on
- Washer nozzles spray weakly
Probable Causes (Ranked by Likelihood)
- Faulty washer pump motor Very High
- Clogged washer nozzles High
- Empty washer fluid reservoir Moderate
- Damaged washer fluid hose Low
Step-by-Step Diagnostic Procedure
-
Check washer fluid level
-
Test washer pump with direct power
-
Inspect washer hoses for leaks or clogs
-
Verify washer switch signal to BCM
Frequently Asked Questions
Why does my washer pump not work?
The most common cause is a failed washer pump motor, which is usually an inexpensive part located at the bottom of the reservoir.
Can I unclog washer nozzles myself?
Yes, a thin needle or compressed air can clear blocked nozzles. Also check for kinked or disconnected hoses.
Does low washer fluid trigger a check engine light?
No, low washer fluid typically only triggers a low fluid indicator on the dashboard, not a check engine light.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.