Passenger Door Ajar Switch Circuit Open
The B0388 code means the vehicle's onboard diagnostic system has detected: Passenger Door Ajar Switch Circuit Open. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- easy
- Estimated cost
- $40 - $250 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Passenger door ajar light stays on
- Interior lights stay on with doors closed
- Passenger door not detected as closed
- Warning chime sounds with passenger door closed
Probable Causes (Ranked by Likelihood)
- Faulty passenger door ajar switch Very High
- Damaged passenger door wiring High
- Door latch not fully engaging Moderate
- BCM door input circuit fault Low
Step-by-Step Diagnostic Procedure
-
Test passenger door ajar switch operation
-
Check passenger door wiring continuity
-
Inspect door latch mechanism
-
Verify BCM door input signals
Frequently Asked Questions
Why does my door ajar light stay on?
Usually caused by a faulty door jamb switch or a door latch that is not fully closing.
Can a door ajar warning drain my battery?
Yes, if it keeps interior lights on, it can drain the battery overnight.
How do I test the door switch?
Use a multimeter to check continuity when the door is fully closed. The switch should close the circuit.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.