Driver Seat Up/Down Position Sensor Circuit High
The B0207 code means the vehicle's onboard diagnostic system has detected: Driver Seat Up/Down Position Sensor Circuit High. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $70 - $320 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Seat height reads maximum constantly
- Height memory raises seat too high
- Vertical position data incorrect
- Seat memory system disabled
Probable Causes (Ranked by Likelihood)
- Open circuit in height sensor wiring Very High
- Disconnected height sensor connector High
- Corroded sensor pins Moderate
- BCM reference voltage issue Low
Step-by-Step Diagnostic Procedure
-
Inspect height sensor connector
-
Measure circuit resistance end-to-end
-
Check for corrosion at connections
-
Test BCM 5V reference at sensor
Frequently Asked Questions
What does a high circuit mean?
The signal line reads near reference voltage, usually due to an open circuit or disconnected sensor.
Can I ignore this code?
You can drive safely but seat memory height will not work until repaired.
Is the sensor accessible without removing the seat?
In most vehicles yes, but some models require partial seat removal.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.