Interior Light Timer Circuit Malfunction
The B0113 code means the vehicle's onboard diagnostic system has detected: Interior Light Timer Circuit Malfunction. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- moderate
- Estimated cost
- $30 - $200 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Interior lights do not turn off automatically
- Interior light timer not functioning
- Lights stay on with all doors closed
- Timer duration inconsistent
Probable Causes (Ranked by Likelihood)
- BCM interior light timer function failure Very High
- Faulty door ajar sensor input High
- Interior light relay stuck on Moderate
- BCM software glitch Low
Step-by-Step Diagnostic Procedure
-
Check BCM timer settings with scan tool
-
Verify all door ajar sensors
-
Test interior light relay
-
Perform BCM software update if available
Frequently Asked Questions
Why do interior lights stay on?
Usually a door ajar sensor telling the BCM a door is open, or a failed timer function in the BCM.
How long should interior lights stay on?
Most vehicles turn off interior lights after 10 to 20 minutes if a door ajar signal is present.
Will this drain my battery?
Yes, if interior lights remain on due to a timer fault, the battery can drain within hours.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Share carcodefinder.com with a friend who needs to decode their check engine light.