Right License Plate Light Circuit Malfunction
The B0067 code means the vehicle's onboard diagnostic system has detected: Right License Plate Light Circuit Malfunction. This is a low severity code.
- Keep driving?
- Yes, but fix soon
- DIY difficulty
- easy
- Estimated cost
- $5 - $80 (parts and labor)
Basic scanners skip body codes entirely. BlueDriver reads airbag, HVAC, lighting, and BCM codes through your phone.
Check Price on AmazonAffiliate link -- we earn a commission at no extra cost to you.
Common Symptoms
- Right license plate light not illuminating
- Partially lit plate at night
- Citation for insufficient illumination
- Failed vehicle inspection
Probable Causes (Ranked by Likelihood)
- Burned out license plate bulb Very High
- Corroded socket from road spray High
- Cracked or water-filled housing Moderate
- Damaged ground wire at plate bracket Low
Step-by-Step Diagnostic Procedure
-
Inspect license plate bulb
-
Check socket for corrosion
-
Verify ground connection
-
Test voltage with lights on
Frequently Asked Questions
How do I access the plate light bulb?
Usually from behind the bumper or by removing a small lens cover.
Should I replace both at once?
Yes, if one failed the other is likely near end of life.
Can a bad ground cause both to fail?
Yes, both often share a common ground point.
Sources
This page is built from documented references. Verify against your own service info before repair work.
Explore More
Was this helpful?
Send this to whoever is fixing the car — your mechanic, or the person asking what the light means.