Barometric Pressure Sensor Circuit Range/Performance
What does P2224 mean?
The P2224 code means the vehicle's onboard diagnostic system has detected: Barometric Pressure Sensor Circuit Range/Performance. This is a low severity code.
Common Symptoms
- Check Engine Light on
- Slight decrease in engine performance at altitude
- Poor fuel economy
- Rough idle in some conditions
- Hesitation on acceleration
Probable Causes (Ranked by Likelihood)
- Faulty barometric pressure sensor Very High
- Contaminated or blocked sensor port High
- Wiring issue between the sensor and ECM Moderate
- Vacuum leak affecting sensor reading Moderate
- ECM software calibration error Low
Step-by-Step Diagnostic Procedure
-
Compare barometric pressure sensor reading to a known-good barometer or weather station data
-
Inspect the sensor port for contamination or blockage
-
Check sensor wiring and connector for damage or corrosion
-
Verify no vacuum leaks near the sensor location
-
Check for ECM software updates
Frequently Asked Questions
What does the barometric pressure sensor do?
The barometric pressure sensor measures atmospheric pressure so the ECM can adjust fuel injection and ignition timing for current altitude and weather conditions.
Is the barometric pressure sensor the same as the MAP sensor?
On some vehicles, the MAP sensor also functions as a barometric pressure sensor at key-on before the engine starts. Other vehicles have a separate dedicated barometric sensor.
Does altitude affect this code?
Yes, if you frequently drive at varying altitudes, a marginal barometric sensor may trigger this code. The sensor should accurately track changes in atmospheric pressure.