Invalid Data Received From Fuel Pump Control Module
What does U0410 mean?
The U0410 code means the vehicle's onboard diagnostic system has detected: Invalid Data Received From Fuel Pump Control Module. This is a critical severity code.
Common Symptoms
- Engine stumbles or stalls intermittently
- Check Engine Light illuminated
- Fuel pressure fluctuating erratically
- Hard starting or extended cranking
- Engine power cuts out during acceleration
Probable Causes (Ranked by Likelihood)
- Fuel pump control module sending invalid pressure data Very High
- Fuel pump driver module overheating High
- Corroded wiring to fuel pump module Moderate
- Fuel pump drawing excessive current causing data errors Moderate
Step-by-Step Diagnostic Procedure
-
Monitor fuel pressure data with a scan tool for erratic readings
-
Check fuel pump module temperature (often mounted near the fuel tank and prone to overheating)
-
Inspect wiring and connector at the fuel pump driver module
-
Measure fuel pump current draw with an amp clamp
-
Check for related fuel pressure and pump codes
Frequently Asked Questions
Can I drive with code U0410?
No, do not drive. Erratic fuel pressure can cause the engine to stall without warning, which is extremely dangerous in traffic or at highway speeds.
What causes U0410?
Often caused by an overheating fuel pump driver module, especially common on Ford trucks and SUVs. The module is typically mounted on the frame rail near the fuel tank.
Is U0410 expensive to fix?
Costs range from $250 to $900. The fuel pump driver module is a common failure part on Ford vehicles and is relatively straightforward to replace.